![]() ![]() buttons (1-8) are toggle buttons and will light its LED when ON.Upon pressing one of the Track Selection buttons, the current position of the 8 Device Control knobs will be sent. These knobs and switches will output on a different MIDI channel based on the current Track Selection (track 1 = MIDI channel 0, track 8 = MIDI channel 7, MASTER = MIDI channel 8). These buttons dictate which one of nine banks the DEVICE CONTROL knobs and DEVICE CONTROL switches belong to. These buttons will NOT send out MIDI in generic mode for its state. buttons (1-8 + MASTER) are radio style and only one of the 9 buttons is ON at a time.,, are toggle buttons and should light its LED when ON. buttons are momentary and should light its LED when ON.Pass in any color value and determine which supported color code is the best match.īased on the: Akai APC40 Mk2 Communications Protocol Version 1.2.RBG reference colors in formats: RGB, Hex, Bytecode.Control LEDs for Device/Bank & the 1-8 Buttons.Control LED diodes for Play, Record, Session.Control all (45) RBG LED pads, including switching between Solid, Oneshot, Pulse, Blink modes.Control all (16) LED knobs, including switching between Default, Pan, and Volume "styles".Control all (8) Bi Color buttons, with Off/Yellow/Orange support.Switch on the fly between the (3) firmware modes.Control all light sources (everything), using the official outgoing MIDI protocol.Perhaps someone else will find it useful. Wrote this for a project that required full outgoing RGB control (PC/Host -> Akai device) of the APC40. The Akai outgoing MIDI API for the APC40 MK2 controller - in a easy to use/port Utility class. Akai APC40 MK2: Outgoing MIDI API Messaging + Color Utils
0 Comments
Leave a Reply. |